Standard Tools Making Component
-
Guide Pillar For Large Tools D022
● Material : Steel, Surface Hardened
● DIN 9833/ISO 9182-3
● Surface hardness: 60+2 HRC.
● Hardness penetration depth: 1.5 mm.
● Up to fd1=80 without central hole.
● By fd1=80 with 1 lifting thread M12 .
● From fd1=100 with central hole(through) and with 2 lifting threads M12 .
● The guide pillar is only recommended in use with solid lubricants. (D046 , D043 ).
-
Guide Pillar With Collar D029
● Material : Steel, Surface Hardened
● Surface hardness: 60+2 HRC.
● Hardness penetration depth: 1.5 mm.
● The guide pillar is only recommended in use with solid lubricants. (D046 , D043 ). -
Die Set Unit 3SU
● Plates Materisal: 1.1730
● The stamping Die accuracy starts with the Die set and Guide system.
● In this drawing has been tried to consider all basic requirements of a progressive Die set for excessive production.
● The spacers in the Dies make the Die changing height comfortably in the maintenance and repairing.
● The guide pillar with hole reduces inertia in Die that it’s suitable for high speed. -
Sliding Pad D061
● Non-Liquid Lubricant
● Material: Bronze/Cast Iron
● Are used in applications of linear or rotary motion in tool making, and similar engineering uses.
● Advantages of oilless guide elements:
- Good emergency sliding properties.
- Highest carrying capacity at low speed.
- Useable under water or with chemical solutions.
- Extremely wide temperature resistance hot and cold.
- Damping properties in presence of vibration. -
Ball Cage D142
● Cage Material: Polyacetal Resin Injection Moulded
● Ball :
- DIN 5401
- Grade 10
- Mat. 1.3505
- Hardness 740-900 HV10
- Ra 0.02 μ m
- Form tolerance 0.25 μ m
- Sorting tolerance 0.5 μ m... -
Rectangular Die Set CM
● Cast Iron-Center Pillars
● DIN 9812 Shape C and CG
* Different from DIN 9812... -
Sliding Pad D063
● Non-Liquid Lubricant
● Material: Bronze/Cast Iron
● Are used in applications of linear or rotary motion in tool making, and similar engineering uses.
● Advantages of oilless guide elements:
- Good emergency sliding properties.
- Highest carrying capacity at low speed.
- Useable under water or with chemical solutions.
- Extremely wide temperature resistance hot and cold.
- Damping properties in presence of vibration. -
Guide Pillar D0131
● Material:~1.7131 / 720HV
● Similar to DIN 9825 / ISO 9182-2
● Easy replacement and disassembly, installation. -
All-Steel Die Set 5S...B/T
● Plates Material: St37 , St52 , 1.1730
● Points:
- Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
- When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 in order to have an easy transportation.
- Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
- Possible to produce and montage your special guide system.
- Delivery time: 10 to 15 days respectively to dimensions of a1,b1.
-
Sliding Pad D065
● Non-Liquid Lubricant
● Material: Bronze/Cast Iron
● VDI 3357
● Are used in applications of linear or rotary motion in tool making, and similar engineering uses.
● Advantages of oilless guide elements:
- Good emergency sliding properties.
- Highest carrying capacity at low speed.
- Useable under water or with chemical solutions.
- Extremely wide temperature resistance hot and cold.
- Damping properties in presence of vibration. -
Rectangular Die Set CZ
● Cast Iron-Diagonal Pillars
● DIN 9819 Shape C and CG
* Different from DIN 9819... -
All-Steel Die Set 3SH
● With Stripper - Plates Material: St37, St52, 1.1730
● Similar DIN 9868/ISO 11415
● Points:
- Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
- When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
- Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
- Possible to produce and montage your special guide system.
-
All-Steel Die Set 3SM
● With Stripper - Plates Material: St37, St52, 1.1730
● Similar DIN 9868/ISO 11415
● Points:
- Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
- When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
- Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
- Possible to produce and montage your special guide system.
-
All-Steel Die Set 3SZ
● With Stripper - Plates Material: St37, St52, 1.1730
● Similar DIN 9868/ISO 11415
● Points:
- Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
- When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
- Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
- Possible to produce and montage your special guide system.
-
Sliding Pad D067
● Non-Liquid Lubricant
● Material: Bronze/Cast Iron
● ISO 9183-1
● Are used in applications of linear or rotary motion in tool making, and similar engineering uses.
● Advantages of oilless guide elements:
- Good emergency sliding properties.
- Highest carrying capacity at low speed.
- Useable under water or with chemical solutions.
- Extremely wide temperature resistance hot and cold.
- Damping properties in presence of vibration. -
All-Steel Die Set 2SH
● With Stripper - Plates Material: St37, St52, 1.1730
● Similar DIN 9868/ISO 11415
● Points:
- Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
- When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
- Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
- Possible to produce and montage your special guide system.
... -
All-Steel Die Set 2SM
● With Stripper - Plates Material: St37, St52, 1.1730
● Similar DIN 9868/ISO 11415
● Points:
- Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
- When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
- Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
- Possible to produce and montage your special guide system.