● Material : Steel, Surface Hardened
● DIN 9833/ISO 9182-3
● Surface hardness: 60+2 HRC.
● Hardness penetration depth: 1.5 mm.
● Up to fd1=80 without central hole.
● By fd1=80 with 1 lifting thread M12 .
● From fd1=100 with central hole(through) and with 2 lifting threads M12 .
● The guide pillar is only recommended in use with solid lubricants. (D046 , D043 ).
● Plates Materisal: 1.1730
● The stamping Die accuracy starts with the Die set and Guide system.
● In this drawing has been tried to consider all basic requirements of a progressive Die set for excessive production.
● The spacers in the Dies make the Die changing height comfortably in the maintenance and repairing.
● The guide pillar with hole reduces inertia in Die that it’s suitable for high speed.
● Material : PUR/80 Shore A
● Material : Forged and Heat- Treated Steel
● Low Height
● Material: Heat-Treated Steel
● DIN 787
● M8-M12 strength class 10.9
● M14-M30 strength class 8.8
● Rolled thread.
● Pneumatic Mounting Flange Body
● Double Action Cylinder
● Strength aluminum body
● Anodised body for corrosion Resistance.
● Hard chrom plated rod.
● Parts of mechanism are made of hardened ateel and coated black.
● Note : Air Unit (filter and lubricant) shall be used (6bar inlet pressure).
● Air Consumption _ Air Consumption per cycle.
Multi-purpose, silicon-based mould release agent. Preferably used for all kinds of plastics processing, such as injection moulding, compression moulding, blow moulding etc., for thermoplastics, thermoset plastics and elastomers, not for silicone rubber. may also be used when machining plastics material. reduces friction of plastic, rubber and metal surfaces. no physiological side effects, does not cause layering. for temperatures up to 250 c . not recommended for parts requiring subsequent surface treatment, such as printing, painting etc.
Rotating flange SET950X with Flange interface are suitable for converting threaded regulators, controls, relief valves and etc. to a flanged one.
● مزیت بزرگ بدنه های قالب ستاک, ارائه كلاس دقت و قابلیت تعویض ، جابجایی و تغییر صفحات و اجزاء به هر دلیل و نیز وجود مبنای مناسب برای ماشینکاری است.
● Material:~1.6582 / 55±2HRC
● DIN 16752-D
● Material : ~ 1.7131 | 720HV
● DIN 16761-C
* Different From DIN 16716-C
● Material : Steel-hardend
● WS ; Alloy tool steel
- Material No: 1.2210, 1.2516, 1.2842 or Similar. Characteristics: Hard and tough tool steel, medium wear resistance.
- Application Field: Ejectors and inserts for injection moulds and piercing/blanking dies for mild steels, low carbon steels, non-ferrous metals, plastics and paper
● DIN EN 28734/ISO 8734-A
● Hardness 60±2 HRC