press

  • Picture of Hydraulic Pneumatic Intensifier Cylinder | PH/04

    Hydraulic Pneumatic Intensifier Cylinder | PH/04

    Figure explanation: the compressed air enters the chamber number 1 and the cylinder number 2 starts moving by a low force (rapid movement). After approaching the already-determinated point, the cylinders number 3 and 4 bloc the oil path by compressed air and the cylinder number 4 enters the oil chamber. Here in case ( the working movement), the force will be multiplied.
    Advantage
    -Generating Substantial force by compressed air
    -Occupying the space as much as hydraulic system.
    -High stroke of movement.
    -Non-necessity of hydraulic system.
    Specifications:
    Entering air pressure:0.7 - 10 bar
    Rapid stroke:ΔX=100, F=380 kgf in 6 bar
    Working stroke:ΔX=15, F=4120 kgf in 6 bar
    Total stroke:X = 115 mm

    ...
  • Picture of Table Press Eccentric Model TPE

    Table Press Eccentric Model TPE

    ● سایز : 2تن
    ● تکضرب، رگباری (220ضرب بر دقیقه)

  • Picture of Hydraulic Unit Model PM

    Hydraulic Unit Model PM

    ● L-size will be made on request
    ● Table dimensions up to 1200x700mm on request.
    ● Tracks and bores, for installing the mould and special machining can be done on request.

  • Picture of Pneumatic Stamping Unit PSU

    Pneumatic Stamping Unit PSU

    ● By Structure of Die Sets
    ● Other specifications can be done on request.
    ● Dimensions of die sets: Page CM , CH .