Accessories

  • T NUT Model E407

    E407

    ● DIN 508
    ● Tensile strength class 10.
    ● Full load capacity is only allowod with the full thread length matched.
    * Use the length of the thread.
    ** Excess of Din508

  • COLLAR NUT Model E401

    E401

    ● Material: Forged, Turned, Heat-Treated Steel
    ● DIN 6331
    ● Height 1.5 dia.
    ● Tensile strength class 10.
    * Different from DIN 6331

  • WASHER Model E404

    E404

    ● Material: Turned, Heat-Treated Steel
    ● DIN 6340

  • MACHINE VISE Model V12

    V12

    ● Hydraulic With Swivel Base

  • PULL-DOWN CLAMP Model E3060

    E3060

    ● Low Height
    ● Material: Heat-Treated Steel

  • SCREW JACK WITH COUNTER NUT Model E314

    E314

    ● Adjustable
    ● DIN 6318B/DIN 6318C

  • PLAIN CLAMP Model E307

    E307

    ● Material : Heat-Treated Steel
    ● DIN 6314

  • CLAMP, INFINITELY VARIABLE Model E305

    E305

    ● Material : Forged and Heat- Treated Steel

  • PLAIN CLAMP Model E307/.../F

    E307/.../F

    ● Material : Heat-Treated Steel,Forged
    ● DIN 6314

  • PULL-DOWN CLAMP Model E3064

    E3064

    ● Low Height Clamping Jaws
    ● Material: Cast Iron ,Heat-Treated Steel

  • PULL-DOWN CLAMP Model E3067

    E3067

    ● Extra Strong Clamping Jaws
    ● Material: Cast Iron ,Heat-Treated Steel

  • HEXAGON NUT Model E402

    E402

    ● Material: Forged, Turned, Heat-Treated Steel
    ● DIN 6330B
    ● Height 1.5 dia.
    ● Tensile strength class 10.

  • EXTENSION NUT Model E403

    E403

    ● Material: Forged, Turned, Heat-Treated Steel
    ● DIN 6334
    ● Height 3 dia.
    ● Tensile strength class 10.

  • MINI TYPE DEMAGNETIZER Model MTD

    MTD

    ● Note:
    - After approx, 20-minute continual operation, ok when its temperature rises up to the set temperature, power supply will stop automatically to protect the product. When this happens, wait for 10 minutes or till temperature drops, and then it’ll resume operation automatically.

  • DEBURRING SOLUTION Model PK

    PK

    ● Plastic handle
    ● Deburring plastic and soft metal parts.
    ● The blade is turning 360 so it will be adjusted to the actual deburring angle.
    ● Blade is changeable by turning of the nose part of the handle.
    ● in metale handle type, blade will be replaced by pressure.
    ● All blades’ deburring are in direction of CW (clock wise) exept K43.
    ● K43 blade is used in CW and CCW directions.

  • DEBURRING SOLUTION Model MK

    MK

    ● Metal handle
    ● Deburring plastic and soft metal parts.
    ● The blade is turning 360 so it will be adjusted to the actual deburring angle.
    ● Blade is changeable by turning of the nose part of the handle.
    ● in metale handle type, blade will be replaced by pressure.
    ● All blades’ deburring are in direction of CW (clock wise) exept K43.
    ● K43 blade is used in CW and CCW directions.

  • BEEP LIGHT EDGE FINDER Model SK20

    SK20

    ● No need to rotate while measuring.
    ● Accuracy of edge: within 0.01mm.
    ● save time to find positions.
    ● Edge finder by light or beep.
    ● Note:
    - While finding the edge, the spindle should be on complete stop situation.

  • MECHANICAL EDGE FINDER Model SK10

    SK10

    ● Accuracy of zero point to point is within 0.01mm
    ● R.P.M. Within 450-600.

  • STUD Model E406

    E406

    ● DIN 6379
    ● M8-M12 strength class 10.9
    ● M14-M30 strength class 8.8
    ● NOTE: 1x dia. of thread should match with nut.

  • MACHINE VISE Model V13

    V13

    ● Hydraulic Without Swivel Base

  • FORKED CLAMP WITH PIN END Model E308

    E308

    ● Material : Heat-Treated Steel
    ● DIN 6315C

  • SCREW Model E4021

    E4021

    ● Adjustable