|
● The sliding surface should be lightly greased with lithium grease emulsion, prior to commissioning.
● From 25 to 30 per-cent of the guide systems are equipped with solid lubricant.
● Recommended for special guide pillars D029 , D022 to DIN9833/ISO9182-3
● Bushes can be used with radial or axial motions.
|
● The surfaces in use should be finished ground and pref-erably have parallel sliding movement.
● Up to 200 C° for heat tolerance for general uses.
● Producing with different height and diameter from the table is possible.
|
فارسی
English
русский