|
● The sliding surface should be lightly greased with lithium grease emulsion, prior to commissioning.
● From 25 to 30 per-cent of the guide systems are equipped with solid lubricant.
● contact adhesive: G7 bore.
● If using press fitment, reduce inside bush diameter.
● Bushes can be used with radial or axial motions.
|
● The surfaces in use should be finished ground and pref-erably have parallel sliding movement.
● Up to 200 C° for heat tolerance for general uses.
● press fits: H7 bore.
● If required secure with set screw.
|
فارسی
English
русский