LEVER CLAMP PCS

LEVER CLAMP

Product specifications :

● Pneumatic Mounting Flange Body
● Double Action Cylinder
● Strength aluminum body
● Anodised body for corrosion Resistance.
● Hard chrom plated rod.
● Parts of mechanism are made of hardened ateel and coated black.
● Note : Air Unit (filter and lubricant) shall be used (6bar inlet pressure). It is essential to use flow control in way of air inlet & outlet because of avoiding clamp knocking
● Stroke _ In both type of clamping(R&L type),25% of clamp moving is linearly in direction of Y axis and then it turns 90 ° into its position
● Air Consumption _ Air Consumption per cycle.
* See top view for selecting the rotate direction.

Picture of LEVER CLAMP  PCS
Picture of LEVER CLAMP  PCS

The table below is smart. Use the slider in the first row of each column to find the right product.

Ordering Code Piston dia. Force F(N) Stroke (S) Air Consumption (dm3) Weight (g) Price Add to cart
*PCS/25/R
25 220 - - -
0 تومان
*PCS/25/L
25 220 - - -
0 تومان
PCS/32/R
32 360 26 0.05 710
0 تومان
PCS/32/L
32 360 26 0.05 710
0 تومان
PCS/40/R
40 630 26 0.1 900
0 تومان
PCS/40/L
40 630 26 0.1 900
0 تومان
PCS/50/R
50 990 - - -
0 تومان
PCS/50/L
50 990 - - -
0 تومان

 

Layout:

- Mounting from above on tapping plate with Socket Head Cap Screw.

Note: Swing clamps can squeeze only during the Y stroke.

Example:

 

Point:

Mounting of swing lever

1- Setup swing lever with bolt on the piston rod.

2- Turn swing lever into the position.

3- Fix piston’s rod with wrench and tighten bolt.

 

Swing lever removal

1- Hold piston’s rod with wrench and loosen the bolt.

2- As the following pictures, seperate swing lever from piston ‘s rod with light hit by the plastic hammer at the bottom of swing lever.

3- Replacing non-standard lever with standard lever leads to seriouse damage to the swing clamp.

 

 

Write your own review