Standard Parts

           فهرست تصویری قطعات پیش ساخته

 

 

  • قطعات پیش ساخته
  • All-Steel Die Set Model 3SH

    3SH

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • All-Steel Die Set Model 3SM

    3SM

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • All-Steel Die Set Model 3SZ

    3SZ

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • Green Spring Model D64G

    D64G

    ● DIN/ISO 10243

  • PULL-DOWN CLAMP Model E3064

    E3064

    ● Low Height Clamping Jaws
    ● Material: Cast Iron ,Heat-Treated Steel

  • PLAIN CLAMP Model E307/.../F

    E307/.../F

    ● Material : Heat-Treated Steel,Forged
    ● DIN 6314

  • T NUT (RHOMBUS) Model E408

    E408

    ● DIN 508
    ● Tensile strength class 10.
    ● Full load capacity is only allowod with the full thread length matched.

  • Date Marked Pins Model D480

    D480

    ● Special For Injectin Moulds

  • Ejector Pin-Cylindricall Head Model D41B

    D41B

    ● DIN 1530 - Shape A/iso 6751
    ● Material: WAS(Hot Working Steel Nitrided)
    ● Plasma - Nitrided Bright Surface

  • Dowel Pin Extractor Model D251

    D251

    ● Extraction tool for the fast removal of dowels with internal extracting thread and also for shafts , plugs and other machine components.The tool comes interchangeable adaptors and screws, to fit all threads from M4 to M16.

  • Locset Anaerobic Adhesive -Retaining or Joining

    Locset Anaerobic Adhesive-Retaining or Joining

    ● LOCSET Retaining or Joining
    LOCSET Retaining or Joining for installing cylindrical (coaxial) parts, gears, sprockets, bushings, bearings and... Used in housing or on the shaft and with excellent strength, they even cause even permanent connection. Adhesives of this group are the best alternative for pressing Tolerances and even precision Tolerances and is also suitable for parts that are loose in place.

  • Precision Punch Model D225

    D225

    ● DIN 9861, Shape C
    ● Material :WS , HWS , HSS

  • Sliding Pad Model D067

    D067

    ● Non-Liquid Lubricant
    ● Material: Bronze/Cast Iron
    ● ISO 9183-1
    ● Are used in applications of linear or rotary motion in tool making, and similar engineering uses.
    ● Advantages of oilless guide elements:
    - Good emergency sliding properties.
    - Highest carrying capacity at low speed.
    - Useable under water or with chemical solutions.
    - Extremely wide temperature resistance hot and cold.
    - Damping properties in presence of vibration.

  • Rectangular Die Set Model CR

    CR

    ● Cast Iron-Rear Pillars
    ● DIN 9822
    * Different from DIN 9822

  • Matrix Without Collar Model D267

    D267
    1 (1)

    ● Material : HSS
    ● ISO 8977
    ● Description:
    - Possibility of producing all sizes and shapes.d1 hole has been created for wire-cut pass.

  • Guide Pillar (Angle Pin) Model D01

    D01

    ● Material : ~ 1.7131 | 720HV

  • Guide Pillar Model D027

    D027

    ● With Collar
    ● Material: Steel, Surface Hardened

  • All-Steel Die Set Model 2SH

    2SH

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • All-Steel Die Set Model 2SM

    2SM

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • All-Steel Die Set Model 2SR

    2SR

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • All-Steel Die Set Model 2SZ

    2SZ

    ● With Stripper - Plates Material: St37, St52, 1.1730
    ● Similar DIN 9868/ISO 11415

    ● Points:
    - Other plates material, the sizes out of table, guide system, special machining and annealing of plates can be done on request.
    - When the dimensions of the plates are larger than 500mm, the plates are equipped with 2 screw-in lifting studs named E201 . in order to have an easy transportation.
    - Regarding the thickness and dimensions of the Plates, more accurate tolerances can be done if requested.
    - Possible to produce and montage your special guide system.

  • PULL-DOWN CLAMP Model E3067

    E3067

    ● Extra Strong Clamping Jaws
    ● Material: Cast Iron ,Heat-Treated Steel

  • FORKED CLAMP WITH PIN END Model E308

    E308

    ● Material : Heat-Treated Steel
    ● DIN 6315C