Standard Mould Making Component

  • Modular Retainer(Slide Fixture) D541/8

    D541/8

    ● Material: Steel, Hardened

    From 207,00 ₽
  • Guide Pillar D031

    D031

    ● Material : ~ 1.7131 | 720HV

    From 91,50 ₽
  • Guide Bush D11

    D11

    ● Material : ~ 1.7131 | 720HV
    ● DIN 16761-E
    * Different From DIN 16761-E

    From 111,50 ₽
  • Locating Ring D100

    D100

    ●Material: 1.7131

    From 399,00 ₽
  • Guide Pillar D011

    D011

    ● Material : ~ 1.7131 | 720HV
    ● The main advantages of D011 are easy moving in g6 and pressing fitness of m6 in reamed bore of H7.

    From 84,00 ₽
  • Date Marked Pins D480

    D480

    ● Special For Injectin Moulds

    From 0,00 ₽
  • Guide Pillar (Angle Pin) D01

    D01

    ● Material : ~ 1.7131 | 720HV

    From 75,00 ₽
  • Date Marked Pins

    D483

    ● Special For Die - Casting

  • Manifold Block H52401

    H52401

    ● Material: 1.2312
    ● Features and Benefits:
    1 ) The symmetrical design with the equal length run of injection from the main runner to each of the cavity, even in linear arrangement or with a high cavity number.
    2 ) Optimal placement on the input and output of thermal elements to allow them to securely insert them.
    3 ) Uniform heat distribution in the Manifold block, measurement and temperature control in the depth of block.
    4 ) Applying new and optimal methods for blocking and changing the material path with high reliability.
    5 ) Close interaction of SETAAK with the customer to reach the best design.

  • Guide Pillar (Angle Pin) 019

    D019

    ● Material : ~ 1.7131 | 720HV

  • Guide Pillar (Angle Pin) 021

    D021

    ● Material : ~ 1.7131 | 720HV
    ● Advantage :
    - Easy installation.
    - With using socket set screw D35, no need for machining of behind the holder.

    From 137,00 ₽
  • Guide Bush D09

    D09

    ● Material : ~ 1.7131 | 720HV

    From 122,00 ₽
  • Guide Sleeve D023

    D023

    ● Material : ~ 1.7131 | 720HV

  • Manifold Block H52411

    H52411

    ● Material: 1.2312
    ● Features and Benefits:
    1 ) The symmetrical design with the equal length run of injection from the main runner to each of the cavity, even in linear arrangement or with a high cavity number.
    2 ) Optimal placement on the input and output of thermal elements to allow them to securely insert them.
    3 ) Uniform heat distribution in the Manifold block, measurement and temperature control in the depth of block.
    4 ) Applying new and optimal methods for blocking and changing the material path with high reliability.
    5 ) Close interaction of SETAAK with the customer to reach the best design.
    ● Note: Minimum distance c is d in D537.

  • FILTER D564

    D564

    ● Material: 1.2344/42±2HRC

  • Manifold Block H52402

    H52402

    ● Material: 1.2312
    ● Features and Benefits:
    1 ) The symmetrical design with the equal length run of injection from the main runner to each of the cavity, even in linear arrangement or with a high cavity number.
    2 ) Optimal placement on the input and output of thermal elements to allow them to securely insert them.
    3 ) Uniform heat distribution in the Manifold block, measurement and temperature control in the depth of block.
    4 ) Applying new and optimal methods for blocking and changing the material path with high reliability.
    5 ) Close interaction of SETAAK with the customer to reach the best design.

  • Transfer Bushing D561

    D561...

    ● Material:1.2344/50±2HRC

  • Guide Pillar D00

    D00

    ● Material : ~ 1.7131 | 720HV
    ● DIN 16761-A
    * Different From DIN 16761-A

    From 207,00 ₽
  • Seating washer D55

    D55

    ●For Ejector Plates

    From 27,50 ₽
  • Hose Nipple D87

    D87

    ● Material: Brass

    From 14,00 ₽
  • Extention Tube D91

    D91

    ● Material: Brass

    From 75,50 ₽
  • Recycle Marked Pins D482

    D482

    ● Special For Injectin Moulds

  • Date Marked Pins D484

    D484

    ● Special For Die-Casting

  • Mould M2020

    M2020

    ● مزیت بزرگ بدنه های قالب ستاک, ارائه كلاس دقت و قابلیت تعویض ، جابجایی و تغییر صفحات و اجزاء به هر دلیل و نیز وجود مبنای مناسب برای ماشینکاری است.

    From 728,00 ₽
  • Mould M2025

    M2025

    ● مزیت بزرگ بدنه های قالب ستاک, ارائه كلاس دقت و قابلیت تعویض ، جابجایی و تغییر صفحات و اجزاء به هر دلیل و نیز وجود مبنای مناسب برای ماشینکاری است.

    From 846,50 ₽
  • Mould M2030

    M2030

    ● مزیت بزرگ بدنه های قالب ستاک, ارائه كلاس دقت و قابلیت تعویض ، جابجایی و تغییر صفحات و اجزاء به هر دلیل و نیز وجود مبنای مناسب برای ماشینکاری است.

    From 0,00 ₽
  • Mould M2525

    M2525

    ● مزیت بزرگ بدنه های قالب ستاک, ارائه كلاس دقت و قابلیت تعویض ، جابجایی و تغییر صفحات و اجزاء به هر دلیل و نیز وجود مبنای مناسب برای ماشینکاری است.

    From 1 104,00 ₽