LOCSET Sealing are used in threaded joints and pipes to sealing or eliminate the possibility of leakage.The connection does not open and will not leak due to vibration.the joint is protected from corrosion and retains its properties until opened(with generally tools)
The most efficient and economical way is to use LOCSET anaerobics for thread locking. At the same time the thread is protected against fretting corrosion and sealed against all kinds of media. When using LOCSET anaerobics for thread locking it must be considered what tools should be used for disassembling, which temperatures and which chemical effects it must withstand and which size of thread is being used. These parameters define the strength class and the viscosity of the adhesive to be selected.
LOCSET surface sealing is used for complete sealing of two metal plates and flanges,so that after two plates are stacked,it fills all the scratches and creates the best surface sealing.excess adhesive remaining in the inner case is not cured and can be removed without disturbing or contaminating it.
● Cyanacrylate adhesives would be curing at damp weather and less
thickness. It is a glue for general purposes and producing on different strengths and viscosities.
Temperature rang for continuous operation is -20°c to 100°c.
Available container weights 10gr, 20gr and 50gr.
LOCSET U.V adhesive are one component and solvent free.They are used for bonding parts made of glass , ceramics , synthetic mterials ( plasics ) and matrials that need ineffective ( transparts ) or sired production and assembly ( fast hardening )
2-easy to handle
4-cure at room temperature
5-low conectration of pollutant substances at workspace
6-low temperature development during curing
● liquid UV
The Liquid UV adhesives based on acrylate for bonding of glass , translucent synthetic materials among each other or with metals , ceramics and non-translucent synthetic materials.
The adhesivs are one-component, They cure at room temperature visible light